Driver App - Pairing Device (iOS)

ELD Pairing Apple iPhone iOS Bluetooth Driver App

Troubleshooting Steps 1:

1. Close the driver app completely
2. Hold the button on the ELD until it beeps 3 times.
3. Go to the settings on the iPhone > Bluetooth > Find the ELD in the list of Bluetooth devices > press the 'I' with a circle around it > press 'Forget Device'
4. Open the driver application, press choose device, if a device is listed press the X to delete the device from the list.
5. Press pair new device, select the device when it appears.
6. Enter label for the device, press pair and connect, press the button on the ELD to turn the light green, press OK.
7. Enter Bluetooth PIN, and then tap on OK.
8.  Enter username and password.
9. If the device fails to connect for android after this process, try the following steps.

Troubleshooting Steps 2:

1. Go to Phone Settings.
2. Bluetooth Phone Setting.
3. Tap on the (i) circle icon beside EZ-ELD900xxx and then tap on Forget Device.
4. Tap EZ-ELD900xxx again - This will cause the BT pairing request to show but the device settings won't prompt to click the EZ-ELD button once.
5. Before entering BT Pin make sure to press EZ-ELD middle button first then enter BT PIN.
6. After connecting through the settings, you'll be informed to re-enter into EZ-ELD application and pair as normal.

Troubleshooting Steps 3:

1. Unplug and replug EZ-ELD. Make sure it's tightly connected.
2. Wait 90 seconds till LED light change to green.
3. Open Driver app and pair new device.

Troubleshooting Steps 4:

1. Uninstall and Reinstall Driver app.
2. Restart Phone.
3. Press EZ-ELD Middle button until hear 3 beeps.
4. Pair new device.

Troubleshooting Steps 5:

1. Please try another phone or tablet to isolate the issue and see if it will work.