Verify that the DVR is recording and communicating with the FA470, as well as, how to check the video files that are on the DVR. Double-check that the DVR is communicating with the FA470 and recording the timestamp.
Start the Truck
Make sure the DVR status light on the DVR button is "steady green".
Push the button on the DVR. This will cause the DVR button to "slow flash for at least 5 minutes".
Once the "slow flash" turns to "steady green", then you can now plug-in a USB flash drive into the USB port on the DVR.
Once the USB has been inserted, the DVR button light will "fast flash green", which means the data is being transferred to the USB device. This may take time to complete the transfer of the files from the DVR to the USB stick.
When the DVR's button is not lit, then data transfer is complete. Else, if the DVR button flashes red, then the USB stick is full.
You can now unplug the USB and insert it into an PC.
You should see a list of 1 minute files with names indicating date and time and device id. i.e. 2021_09_02_12_34_20_6233618332.h264
The file type of the video is .H264 and should have 3-5 camera views per video. For example the wide angle from the driver and passenger side as well as the class V look-down camera.
