After making a turn, the FOV stays panned out on (driver or passenger). FOV stays panned out, but eventually returns.
Problem Description:
- After making a turn, the FOV stays panned out on (driver or passenger)
- FOV stays panned out, but eventually returns after driving down the road
- Driver needs to use manual panning to correct FOV due to panning FOV stuck after making a turn.
Resolution Steps:
- Go to Driver Menu -> Status -> Vehicle Status Menu and confirm that Ignition shows 2 1 while the truck is keyed on.
- If it shows 2 0, the system is not getting 12V constant when keyed on and the SW cannot properly function.
- The ME system is not wired properly and a tech will need to be dispatched to correct the wiring issue.
Intermediate Corrective Action:
- Park with wheels straight
- Enter the Driver Menu -> Panning -> Calibrate Steering Wheel.
- The system will flash to the Vehicle status menu, showing the calibration was complete.
- Verify that the SWA is now < 30 degrees and the turn cnt and turn cal are reset to 0.